Pastel pumpkins with Marabu Chalky-Chic Spray

How it is done:

• Cover the work area well before spraying and also protect the working environment from any spray mist. It is best to spray outdoors, otherwise ensure adequate ventilation. Prepare the working materials.
• Please wash the pumpkins with a damp cloth and dry them well. The pumpkins must be clean and dry before they can be sprayed. It is best to mask off the pumpkin stems with some adhesive tape.
• Now shake the spray cans well for 2 - 3 minutes. The mixing ball must be clearly audible. First spray the cans onto newspaper to ensure that no solids have settled in the spray head.
• Then spray the pumpkins all over. Always hold the can vertically. If necessary, repeat the spraying process after a short drying time of 2 - 3 minutes. And allow everything to dry thoroughly.
• After completing the painting process, turn the can upside down and spray the valve empty. Wipe the spray head with a damp cloth to prevent the paint from drying on the spray head.
• Now paint the pumpkins as desired with the painters. To do this, either paint the motifs freehand or sketch them out with a pencil.
• Shake the Brilliant Painter vigorously with the cap closed before use. Pump by slowly pressing the tip several times until the ink becomes visible. First write on the pen briefly on a piece of paper. Then design the pumpkins creatively, e.g. with great lettering...
• ... geometric shapes ...
• ... or with funny motifs!