Products - Marabu Kreativ

Extremely fast drying
Rapid recoatability
Simple processing
Fist-class pigments
High colour brilliance
High coverage
Good stability
Excellent light fastness
Finest atomisation of the paint particles
Excellent colour transition
Extremely smooth paint application
Reduced cracking
Suitable for use on almost all surfaces
For indoor and outdoor use

Pre-treatment:
All surfaces must be clean, dry and free from rust and grease. Sand surfaces beforehand if necessary.
Wood: dry sand with grain size P 240.
Metal: Dry sand with grain size P 400-P600, apply a primer to ferrous metals.

Preparation:
Shake the can until you can hear the mixing ball. Then shake thoroughly for a further 2 minutes. Briefly spray the can and perform a test spray before the first application.

Handling:
Always hold the can in a vertical position.

Spray coats:
Spray on a thin undercoat and apply several opaque spray coats after 3 - 5 minutes. Observe a drying time of 3 - 5 min. between 2 spray coats. A spray coat corresponds to a dry film thickness of approx. 30 µm.

Spraying distance:
Approx. 10 -25 cm

Drying:
The following information refers to a dry film thickness of approx. 60 µm (2 spray coats), a temperature of 20°C and relative humidity of 50%
Dust-dry: drying level 1 according to DIN 53150 20 min.
Touch-dry: drying level 3 according to DIN 53150 70 min.
As with all water-based paints, the drying times of the Marabu a-system are also heavily dependent on the ambient temperature and relative humidity in particular. Low relative humidity leads to shorter drying times and high humidity leads to longer drying times.

Further processing:
The paints can be recoated at any time with the same product.

After finishing the work:
Turn the can around and spray the valve until it is empty after finishing the painting process. Wipe the spray head with a damp cloth to avoid the paint drying on the spray head.

What exactly does Aqua technology do at A-System?

The special Aqua technology produces very small bubbles when spraying the paint. As the paint dries, the bubbles recede. The result is a smooth surface with even paint application. With conventional paints, too thick an application can cause the paint to run and drip downwards. a-system is different: with the Aqua technology the paint maintains its structure during drying even when applied thickly, which prevents the paint from running. For the best result for a thick application it is advisable to work in two or more stages. a-system can be overpainted after just three to five minutes of intermediate drying time.

Marabu a-system

light green 960, 400 ml

21200018960

Sets

Available in these sizes

Available in these colours

usage examples

Suitable Products

Marabu Artist Acryl, azo yellow 917, 75 ml

Marabu Table-Top easel 75 cm

Marabu Protective Varnish, 250 ml

Marabu Painting Board 10 x 14,5 x 0,4 cm

Marabu Structure Gel, colourless, matt 102, 225 ml

Marabu Paper pad acrylic, 30 x 40 cm (11.8 x 15.7 in)