Marabu Deco Painter

reseda 061, 2-4 mm

01220034061

back

Matt acrylic marker, water-based. Very good coverage, quick-drying. Light-fast and weather-resistant. For painting all smooth and porous surfaces such as paper, wood, terracotta, metal, plaster, plastic. Pump system with high pigment content!

Sets

Marabu Deco Painter 5pc blister assortment "Basic", 5 x 2-4 mm

Marabu Deco Painter 5 pc blister assortment "Basic", 5 x 1-2 mm

Available in these sizes

Available in these colours

  • water-based
  • matt, acrylic-based
  • odourless, weather-resistant, light-fast
  • also suitable for porous and rough surfaces (e.g. paper, plaster, terracotta)
Instructions:

The surface has to be free from dust and grease before painting. Now you are ready to apply the base coat in the desired colour, e.g. with Marabu Decormatt. Leave to dry thoroughly.

Now you can apply individual designs with the Deco Painter. If you do not want to work free-hand you can use tracing paper. Place the paper template of the desired design on the tracing paper, fix it lightly with adhesive tape to prevent it from slipping and trace the outlines with a thick pencil.

Shake the Painter well before use with the cap in place. Pump the tip by pressing several times until the ink shows.

Then start writing with the marker on some paper, not directly on the object to be painted. Now the transferred design can be traced with the Painter. After use replace the cap until it clicks in place. Store horizontally!
Effective writing with the calligraphy pen

Always keep the calligraphy tip in the same position while writing to obtain more effective lettering.Even paint flow

Pumping has to be repeated during painting to ensure even paint flow. Close the cap, shake the marker and only pump 2 to 3 times. Never leave the marker open for too long as this can dry out the tip. Store horizontally!Closing the caps

Close the cap of the Marabu Painter with a “click” after use.Marabu Painter

Please follow these guidelines to enjoy your markers for as long as possible: 1. Never leave the markers open for too long, not even during painting, as this can dry out the tip! 2. Remove any excess paint, always clean the markers and reclose the cap tightly! 3. Always store the markers horizontally.Cleaning painting objects

All objects have to be free from dust and grease before painting.Valve system/pump system: Pumping markers

To activate the valve system, shake the marker with the cap in place (the mixing balls have to be clearly audible). Then remove the cap and push down the tip down on a neutral surface a few times until the ink becomes visible. Please note: 1. The thin 0.8 mm tip only has to be pumped twice. 2. Metallic and glitter colours have to be shaken longer as the pigments are heavier. 3. Proceed slowly when pumping the Marabu Painters as too much pumping can lead to excessive discharge of ink.Dried or dirty paint tips

Simply remove dried or dirty pain tips from Deco Painter, Porcelain Painter, Glas Painter, Textil Painter plus or Textil Glitter Painter from the marker and clean them with water. Soak in warm water for a while if necessary. ThenWeather resistance of Marabu Deco and Brilliant Painter

To increase the weather resistance of the Deco and Brilliant Painter let the design dry for at least 30 minutes. Then varnish with one of the aqua Varnishes (Clear Varnish, Matt Varnish or Satin Finish Varnish).
The tip of the Marabu Painter is very long

What could be the reason for the tip of the Marabu Painter sticking our very far?

You have accidentally removed the entire cap. The cap has to be removed carefully.Dried tips on Deco, Porcelain & Glas Painter

How can I clean dried up Painter tips?

The tips can be taken out of the marker and rinsed and cleaned under the tap. Then let the tips dry thoroughly and place them back into the marker. Start pumping and continue painting. Never leave the markers without the cap for too long to prevent them from drying out. The markers should be stored horizontally.

usage examples

Suitable Products

Marabu Decormatt Acryl, black 073, 15 ml

Marabu Glitter Pen, glitter-gold 584, 25 ml

Marabu Universal, round No. 8

We inspire with ideas and passion

Marabu has been synonymous with high-quality special colours with the “Made in Germany” quality seal for more than 160 years. Whether it is paints for special printing processes, hobbies or leisure time, or demanding works of art – Marabu products are leaders when it comes to meeting worldwide quality requirements in all areas. With distribution in more than 50 countries, we offer an incomparable full range of creative colours, simple-to-use products, tools and ideas, so that creativity can be indulged in all forms and colours. We develop sustainably and safely. Our utmost priority is of course to protect and safeguard the natural environment. Our annual environmental report gives detailed information about our commitment to the environment.

Useful Links

Follow us

© 2025 Marabu Gmbh