Fancy Easter eggs with Marabu easy marble

How it is done:

• Skewer the eggs on skewers. If the hole drilled in the egg is too big and the skewer does not stick, simply wrap the skewer with some masking tape and skewer again until the egg sits firmly on the skewer. Cover the work area well and fill a sufficiently large plastic container with cold water. The container should be large enough so that the eggs can later be completely immersed in the water.
• Put on disposable gloves and shake the easy marble colours well. Effect and white pigments in neon, metallic and pastel shades settle heavily at the bottom. For these shades, it is best to remove the drip cap and stir the colours with a wooden skewer.
• Shake the easy marble shades well and shake one after the other of the desired shade....
• and drip a few drops of Kristallklar directly from the glass into the water.
• Use a wooden skewer to draw a marbling pattern in the layer of paint on the surface of the water.
• Now slowly dip the egg into the water in a steady motion.
• Before pulling out, blow briefly on the water surface to break up the marbling film. Pull the egg out quickly through the colourless "hole" in the water.
• Before the next marbling, remove the colour residues from the water surface with a piece of paper.